Overview:
MARK4 4K is a FPV Quadcopter with high configuration.
It is equipped with 4K Tarsier V2 Camera of Caddx, and the highest 4K 30fps recording.
The flight controller use SPAN-F722-VTX, dual gyroscope ICM20689(SPI) working on the same time.
Power with the use of the new design 2306.5 motor, and the new G5*4.3*3 Freestyle propeller,
the overall power control sense is stronger, more powerful.
It is equipped with 4K Tarsier V2 Camera of Caddx, and the highest 4K 30fps recording.
The flight controller use SPAN-F722-VTX, dual gyroscope ICM20689(SPI) working on the same time.
Power with the use of the new design 2306.5 motor, and the new G5*4.3*3 Freestyle propeller,
the overall power control sense is stronger, more powerful.
Â
The Mark4 4K frame has been improved, No Propeller in view,no jelly. resulting in a clean picture.
The product includes Mark4 4K 3D printed parts and spare parts.
The product includes Mark4 4K 3D printed parts and spare parts.
Â
Specification:Brand Name: Geprc
Model: Mark4 4K
Item Name:Â Â 224mm Span F7 6S 5 Inch FPV Racing DroneÂ
Weight:381g ( without battery )
|
Mark4 4K Frame Kit ( Improved Version) |
Material: Full 3K Carbon Fiber
Wheelbase: 224mm
Size:138*176mm
Mounting Holes: 30.5*30.5mm/20*20mm
Arms Plate Thickness:Â 5mm
Side Plate Thickness: 2.5mm
Top Plate Thickness:Â 2.5mm
Bottom Plate Thickness: 2.5mm
Protect Plate Thickness: 2mm
|
|
SPAN F7 Dual Gyro Flight Controller AIO VTX ( F722-VTX Stack ) |
MCU: STM32F722RET6
IMU:Â 2x ICM20689(SPI)
BlackBox:Â 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Baro: BMP280
BEC Output: 5V@2A
Integrated LC Filter
Firmware target: EXF722DUAL
Size:36x36mm board, Ï4mm with Grommets Ï3mm
|
| Onboard 5.8G 48CH 600mW VTX |
Channel: 48CH
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 600mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol
|
|
50A BLheli_32 4in1 ESC ( F722-VTX Stack ) |
MCU: STM32FO51K86(32bit 48mHz)
Continuous Current: 50A
Peak Current: 55A (5S)
Current sensor: YES
Telemetry: Supported
Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
Firmware Version: GEPRC-BL32-4IN1
Input Voltage: 3-6S Lipo
|
| Geprc G5x4.3x3 5043 3-Blade Propeller |
Brand Name: Geprc Item Name:Â 5043 3-Blade Propeller Color: Transparent Blue Quantity: 2 CW & 2 CCW |
| Â Geprc GR2306.5 1850KV 6S Motor |
Configuration: 12N14P
Stator Diamter: 23mm
Stator Length: 6.5mm
Shaft Diameter: 4mm
Motor (Dimension: Φ28.2*29.2mm (Dia.*Len))
Wire AWG: 20AWG
Weight(g):31g (not include wire)
|
| Caddx TARSIER 4K V2 FPV Camera |
FOV: 4K F2.8, FOV150°16/9), FPV FOV165°(4/3)
Lens: DUAL Lens F2.8/12Mega
Audio: DUAL DIGATIL MIC
CPU: Dual core dual system
Sensor: 12M sensor,1/1.8INCH 1/2.9INCH
Main Resolution:
4K/30fps 16:9
2.7K/60fps 4:3
1440P 60fps/30fps 4:3
1080p/90fps,60fps,30fps 16:9
720P120fps 16:9
CAMERA Bitrate : 50kbps/66kbps
Video System: NTSC/PAL
ISO:OFF/100/200/400/800/1600
ANTI-SHAKE:Hardware anti-shake
Scene Mode: Auto/Personage/Scenery/Defog
Dimension CAMERA: 19x20mm / DVR:29x29mm(HOLE:20x20mm)
Weight : 18g
|
| Optional Receiver |
PNP Version: Without Receiver Frsky XM+ Receiver/ Frsky R-XSR Receiver/ Flysky A8S V2 RX / TBS Nano SE RX |
| Lipo Battery ( NOT Included) | Recommend 6S 1050mAh-1300mAh Lipo Battery |
Package Included:
1x Geprc Mark4 4K 224mm 6S FPV Racing Drone
