Specification:
Brand Name: Geprc
Model: Mark4 HD GPS
Item Name: 225mm F4 OSD 6S 5 Inch FPV Racing Drone
Optional Receiver: Without Receiver/ Frsky XM+ Receiver/ Frsky R-XSR Receiver/ TBS Crossfire Nano Receiver
Weight: 392g ( Without Battery)
| 225mm Frame Kit | MARK4 HD GPS Frame kits(Improved version) Wheelbase: 225mm Material: 3K Carbon Fiber Arms plate : 5mm Side plate : 2.5mm Top plate : 2.5mm Bottom plate : 2.5mm Protect plate : 2mm Size: 138x176mm |
| F4 OSD Flight Controller | MCU: STM32F405 IMU: MPU6000(SPI) DJI FPV Air Unit Supported. BlackBox: 16Mb onboard Flash Type-C USB interface OSD: BetaFlight OSD w/ AT7456E chip Baro: BMP280 BEC Output: 5V,9V BEC Integrated LC Filter Firmware target:GEPRCF405 Size: 36x36mm board, Ï4mm with Grommets Ï3mm 6x UART |
| 50A BLheli_32 4In1 Brushless ESC | MCU: STM32FO51K86(32bit 48mHz) Continuous Current: 50A Peak Current: 55A (5S) Input Voltage: 3-6S Lipo Firmware Version: GEPRC-BL32-4IN1 Telemetry: Supported Current sensor: YES Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot BLHeliSuite download: (Link) |
GR2306.5 1850KV Brushless Motor ( More Details) | Brand Name: Geprc Model: GR2306.5 Item Name: 2306.5 1850KV 6S Brushless Motor KV: 1850KV Input Voltage: 5-6S Quantity: One PC Version: CW Screw Thread Configuration: 12N14P Stator Diamter: 23mm Stator Length: 6.5mm Shaft Diameter: 5mm Motor (Dimension: Φ28.2*29.2mm (Dia.*Len)) Idle current(10)@10V: 1.95A Max Continuous (Power (15S): 1000W Internal Resistance:38mΩ Max Current(15S): 49A Effciency Current:(3-7A)>85% Rotor: N52H arc magnets Bearings:JAPAN ISC Base casing: Al 7075 Wire AWG: 20AWG Weight(g):31g (not include wire) |
| GEPRC G5x4.3Ã3 5043 3-Blade Propeller | Item Name: 5x4.3 5043 5 Inch 3-Blade Propeller Quantity: 2 CW & 2 CCW |
| 5.8G 600mW VTX | Channel: 48 Power transmission: 0mW(Pit mode) / 25 / 100 / 200 / 600mW Connector type: MMCX Connector Traditional button IRC Tramp protocol |
| CADDX Vista HD Camra | Brand Name: Caddx Item Name: Vista Kit Operating Frequency: 5.725-5.850GHz Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p 60fps): 30-40ms Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot Supported Flight Control System: F3,F4,F7 Operating Temperature Range: 32° to 104° F (0â ~40â) Input Power: 7.4-26.4V Camera Specifications: Sensor: 1/3.2'' CMOS Effective Pixels: 4M Lens: 2.1mm,f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150° (D);122° (H);93° (V) |
| Recommend Lipo Battery (NOT Included) | 6S 1050-1300mAh Lipo Battery |
Features:
- Ultra-lightweight design
- Integrated GPS, able to return to base in emergency
- CADDX Vista HD FPV(Low Latency Mode (720p 120fps): 21-28ms)
- Full 3K Carbon Fiber
- Black Box: 8Mb onboard flash memory
- GR2306.5 1850KV 6S Motors
- Full Soft Mounted FC System: Provides a clean operating environment for gyroscope.
- Exquisite Assembly Process: Eliminate any potential installation problems.
Package Included:
1x MARK4 HD GPS FPV Racing Drone ( 6S Version)
