Description:
Item name: power supply distribution board
Distribution Board Diameter: 40mm
Installation Pitch: 44mm
Features:
1. There are two layers of the distribution board, and any one layer can be selected as the positive pole or the negative pole. This design separates the positive and negative poles to avoid short circuit problems in single-sided welding.
2. Increase the current carrying capacity by means of stacking tin welding, which is safer than copper plating.
3. The volume is smaller, the diameter of the distribution board is only 45mm, saving more space for your aircraft fuselage.
4. More practical, can be used for four-axis, six-axis, eight-axis, etc., up to twelve axes.
5. XT60 plug can be directly inserted on the edge of the distribution board, the plug plating is directly fixed on the distribution board pad, the welding is more convenient, if using XT60U plug, the volume will be smaller, the weight will be lighter;
4. More practical, can be used for four-axis, six-axis, eight-axis, etc., up to twelve axes.
5. XT60 plug can be directly inserted on the edge of the distribution board, the plug plating is directly fixed on the distribution board pad, the welding is more convenient, if using XT60U plug, the volume will be smaller, the weight will be lighter;
6. The main power cord can be welded between any two plugs, suitable for different aircrafts.
2x Distribution Board
1x Screw set
