SPT Servo SPT5430HV-180W 30KG High Voltage High Speed Waterproof Digital Servo for For RC Robot Arm RC Car - 16.00 €

Features:

The servo has a slow start function: the current of the servo is relatively large at the moment of starting or reversing. With this function, the life of the servo will be relatively long;

Blocking protection function: when the servo is continuously blocked or the blocking angle is greater than 3 degrees, the duration is 10 seconds and the current is maintained at 2.0a or above, the servo will start protection and the current will drop to the standby state. When the remote control rotates arbitrarily, the servo returns to normal.

Voltage range: Support 4.8V-8.4V, the following voltage range corresponds to torque and speed data;

Adaptation range: 1:10 remote control drift car and aircraft model, climbing car, single chip microcomputer control board supports 0.5-2.5ms angle 180°;

Gear material: This model is currently upgraded to stainless steel gear

Note: There are many launch tests on the market, and the steering gear can be tested without waterproofing, but the steering gear is not normal after a few days, so all waterproof measures must be carefully done, unlike some brands on the market, only the circuit You can't see the waterproof ring when you brush the board.

Specification:

Brand: SPT

Model: SPT5430HV-180W

Material: Metal

Package Inckuded:

1*SPT5430HV-180W 30KG High Voltage High Speed ​​Digital Servo