Popular products

5 pcs RJXHOBBY MMCX to SMA Female 60mm Low Loss FPV Antenna Extension Cable Adapter For FPV RC Drone 5 pcs RJXHOBBY MMCX to SMA Female 60mm Low Loss FPV Antenna Extension Cable Adapter For FPV RC Drone
DIATONE SW303 Full Color Flash Bang 2812 LED Board 5V Input Direction Night Light For FPV Racer DIATONE SW303 Full Color Flash Bang 2812 LED Board 5V Input Direction Night Light For FPV Racer
URUAV 11.1V 4200mAh 75C 3S Lipo Battery XT60 Plug for RC Racing Drone URUAV 11.1V 4200mAh 75C 3S Lipo Battery XT60 Plug for RC Racing Drone
Upgrade Spare Part Metal Drive Rear Axle Shaft Set For WPL 1/16 6WD B16 RC Truck Upgrade Spare Part Metal Drive Rear Axle Shaft Set For WPL 1/16 6WD B16 RC Truck

SucceX F4 V2.1 TwinG Flight Controller With Barometer + SucceX 50A 2-6s BLHeli_32 Flytower - 79.00 €

SucceX F4 V2.1 TwinG Flight Controller With Barometer + SucceX 50A 2-6s BLHeli_32 Flytower
Seller: Banggood,
Ship from: CN Warehouse, Usually dispatched in 1-3 work days.

FREE SHIPPING: 10-35 days. (DHL faster please check price/quantity first)
Free shipping aviable, Registered postage from 25 €

Video

PRODUCT DESCRIPTION

SucceX F4 TwinG Flight Controller(Dual ICM20689)
FC Specifications
-MCU:STM32F405R6T6
I-MU: Twins IC2689, Twins Gyros built-in(SPI)
-Baro: NO
-OSD: AT7456E
-Blackbox: Blackbox logging device
-5X Uarts(1 2 3 4 5)with build-in inversion
-8X Dshot/Proshot/Oneshot output
-8X individual ESC power/ signal pads
-1X Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
-Smart audio & Tramp VTX protocol: YES(IRC Tramp)
-WS2812 led Strip: YES
-Beeper: YES
-PDB Specifications
-Input: 2-6S(5-36V)
-BEC: 5V/3A cont
FC Firmware
-Betaflight/INAV
-Target:STM32F405-
-FC: IFRC/IFF4_TWIN_G(STM32F405)
Physical
-Mounting: 30.5*30.5mm,φ4mm with Grommets φ3mm
-Dimensions: 36*36mm
-Weight: 6.3g
SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC
Features:
- 8 layers double-sided PCB board;
- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
- 32bit FO51K86 MCU, 48mHz maximum clock speed;
- T.DK MLCC Low ESR ceramic capacitors;
- Top grade NTMFS5C430NL MOSFET;
- Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection
Specification:
- Dimension: 43*39mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight:14.4g
- Supports 2-6S lipo input
- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
- Current sensor: Yes
- BEC: No
- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
- Target: iFlight-BL32-4IN1
RECOMMENDATION:
- No additional capacitor needed up to 5S!
- To en.counter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!
Package included:
SucceX F4 V2.1 TwinG FC+ SucceX 50A 2-6s BLHeli_32 Flytower (pre-assembled)










Add Comment



Latest products

Latest views