This Electronic Speed Controller(ESC)is designed for use with brushed motors in RC Crawlers only. This high-power system for RC Crawler can be dangerous if used incorrectly, so please read this manual carefully. We can' t control the correct use installation, application, or maintenance of this product, no so no liability shall be assumed nor accepted for any damage losses or costs resulting from the incorrect use of the product. Any claims arising from operating, failure or malfunctioning etc will be denied. We assume no liability for personal injury, consequential damages resulting from incorrect use of our product
Features
1.Specially designed for RC Crawler with Brushed motor, excellent throttle linearity and driving feel
2.Compatible with brushed motor only
3. Low internalnce, excellent heat dissipati
4.Multiple protection features: Low voltage cut-off protection for lithium or nickel battery /Over-heat protection /ThrottI signal loss protection
5.Easily programmed and compatible with pocket-sized program card
ESC Specifications
1. Cont. current/ burst current 80A/360a
2. Resistance:0.0014ohm
2. Resistance:0.0014ohm
3.Motor Type: brushed motor compatible only
4. Battery: 2-3 cells Lipo, 4-9 cells NiMH
4. Battery: 2-3 cells Lipo, 4-9 cells NiMH
5.Suitable Car Type: 1/10 Crawler Brushed
6. BEC: 7. 4V/2A (switch mode)
7.Product Dimenison:32*37*18mm,weight:about 42g
8.For the manual,please click here to download
6. BEC: 7. 4V/2A (switch mode)
7.Product Dimenison:32*37*18mm,weight:about 42g
8.For the manual,please click here to download
Instructions
1.Connect BEC wires( three small wires with black plug) to the receiver ensuring the correct orientation
2.Connect motor wires to the ESC (Electronic Speed Controller)
3.Turn on the transmitter first always(and turn off the transmitter last always)
4.Connect battery pack with ESC ensuring the black connects to Black and Red to red, then switch on the esc
5.When the speed controller is turned on the motor emits "Beep"Beep"tone
6.When the throttle stick is in the neutral position the motor re-emits "Beep"tone
7.The ESC is now working and ready
Recommendation(they are not included in the package):
1.Motor for this esc,550 brushed 5 slots engine
2.Program card for this esc,product id:1517068
Recommendation(they are not included in the package):
1.Motor for this esc,550 brushed 5 slots engine
2.Program card for this esc,product id:1517068
1X 80A Brushed ESC
